News

The final SENSIBAT newsletter has been sent!

21 December 2023 – We sent out our final SENSIBAT newsletter. Please have a look at the latest project updates below. If you have not yet registered yourself to receive the…

Testing, validation and assessment (performance, cost, disassembly and recycling)

The final milestone in the SENSIBAT project was to complete component level testing and to assemble the demonstrator battery pack as well as the validation of the obtained test data….

Data processing, state functions and advanced BMS

In the Sensibat project, work package 4 dealt with incorporating novel technology and insights gained from the other work packages. It can be considered the culmination of all research and…

Cell integration of sensors

Within Work package 3 of the SENSIBAT project, level 1 and level 2 sensors were integrated into Li-ion cells. To achieve this objective, in a first step level 1 sensors…

Level 2 sensor design, prototyping and small cell integration

In this Work Package (WP2), Bedimensional and Politecnico di Torino designed and manufactured graphene-based reference electrodes printed on battery separators, i.e., Celgard 2500. These reference electrodes, named level-2 sensors, enable:…

Final General Assembly – Lommel, Belgium

The fifth SENSIBAT newsletter has been sent!

17 July 2023 – Today we sent out our fifth SENSIBAT newsletter. Please have a look at the latest project updates below. If you have not yet registered yourself to receive…

Succesful prototyping of 1Ah cells with integrated level 2 sensors

29 March 2023 – SENSIBAT partners were able to demonstrate the successful integration of Level 2 sensors in 1Ah cells. The prepared cells were electrochemically investigated, providing the project partners…

Successful General Assembly meeting in Genoa!

On the 14th and 15th of March, the SENSIBAT consortium came together for the sixth (but second face-to-face) General Assembly Meeting hosted by BeDimensional (BDM) in Genoa, Italy. During the…

Characterization of 3-5 cm2 pouch cells with integrated level-2 sensor

27 Feb. 2023 – The report on “Characterization of 3-5 cm2 pouch cells with integrated level-2 sensor” describes the activities related to the characterization of the Li-ion battery pouch cells…

Integrated novel level 1 sensors into 5Ah pouch cells

20 Dec. 2022 – The overall goal of SENSIBAT is to manufacture two demonstrator battery packs with a novel battery management system (BMS) and Li-ion pouch cells with integrated sensor…

The fourth SENSIBAT newsletter has been sent!

15 December 2022 – Today we sent out our fourth SENSIBAT newsletter. Please click on the link or on the picture below to read the whole newsletter. If you have not…

Rapid prototyping BMS Master

30 November 2022 – IKERLAN has developed a novel BMS-Master compatible with the advanced BMS slaves and the cell-integrated SENSIBAT temperature and pressure sensor. The developed BMS-master hardware board is…

Prototype circuit to read-out a cell-integrated 5×7 temperature and pressure sensor matrix

30 Sept. 2022 – In order to measure the temperature and pressure distribution over the electrode area of a Li-ion pouch cell, a sensor matrix was developed. This sensor matrix…

Development pouch cell assembly included printed reference electrode

1 June 2022 – The integration of reference electrodes into Li-ion battery cell is envisioned as a potential tool to unlock novel sensing functionalities into current Battery Management Systems (BMS),…